enLanguage
Home / Products / Ship Furniture / Aluminum Furniture

Aluminum Furniture

Product Overview

 

Marine-grade aluminum furniture engineered specifically for shipboard outfitting, offshore living quarters, and marine interior accommodations. Built using structural aluminum profiles and precision TIG welding, designed to withstand continuous marine vibration, corrosive offshore atmospheres, and stringent IMO safety regulations without structural degradation. Available for shipyards, marine outfitting contractors, and offshore project procurement.

 
 
Lightweight Honeycomb Ship Furniture

 

Product Structure & Configuration

Main Structural Profiles:
6063-T5 Marine Extrusions
Wall Thickness: 1.8mm to 2.5mm

 

Joint & Connection Design:
Continuous TIG Seal Welds
Internal Gusset Bracing


Surface Finishes:
IMO-Compliant Powder Coat
Fire-Retardant Upholstery


Component Integration:
Grade 316 Stainless Steel
Deck-Mounting Fasteners
Modular Accommodation Architecture: Designed for easy passage through standard watertight ship doors and narrow passageways during vessel outfitting.
Vibration-Resistant Nodes: Critical stress joints reinforced with internal ribs to absorb cyclic shipboard vibrations and rolling motions at sea.
Drainage Engineering: Integrated weep holes and sealed profile ends prevent internal moisture accumulation and condensation inside humid ship cabins.

 

 
Key Features
 
01/

Optimized Weight-to-Strength Ratio: Reduces total deadweight on vessel superstructures and offshore accommodation modules while maintaining high load performance.

02/

Permanent Corrosion Resistance: Non-ferrous base material combined with protective treatments prevents red rust formation in high-humidity maritime environments.

03/

Space-Saving Shipboard Layout: Stackable and compact geometries designed to maximize floor space in tight ship cabins and mess rooms.

04/

Fire-Safe Material Compliance: Constructed using non-combustible core materials and low-smoke, zero-halogen components suitable for marine safety codes.

 

Materials & Construction

 

Component

Material Specification

Processing Method

Main Frames

Alloy 6063-T5 Aluminum

Precision Extrusion & CNC Bending

Cast Fittings

Alloy A380 Aluminum (Die-Cast)

High-Pressure Die Casting

Marine Hardware

Grade 316 Stainless Steel

Machining & Chemical Passivation

Upholstery/Mesh

Fire-Retardant Marine Fabric

Ultrasonic Cutting & Sealed Stitching

Surface Coating

Thermosetting Polyester Powder

Electrostatic Spray & Thermal Curing

 

Extrusion Tolerances: Raw profiles extruded within tight dimensional limits (plus or minus 0.3 mm) to ensure precise modular assembly on board.
Welding Compliance: Structural welding executed by certified technicians following rigorous marine fabrication standards.
Pre-Treatment Phase: Multi-stage chemical conversion coating applied prior to powder spraying to achieve superior inter-coat adhesion in saline air. 

 

Technical Specifications

 

Parameter

Specification Data

Testing Standard

Alloy Designation

Aluminum 6063-T5 / A380

ASTM B221 / B85

Minimum Wall Thickness

1.8 mm (Frames), 2.5 mm (Load Joints)

Micrometer Gauge Verification

Coating Thickness

80 to 120 microns

ASTM D7091

Salt Spray Resistance

Greater than or equal to 1,000 Hours (No blistering/creep)

ASTM B117

Fire Performance

Low-smoke, low-flame spread rating

IMO FTP Code Compliance

Static Load Capacity

Chair: 180 kg; Berth/Sofa: 250 kg

ISO Seating & Accommodation Standards

 

Applications
 

Passenger Vessels & Ferries

Public seating areas, dining saloons, open-air decks, and crew mess rooms.

Offshore Accommodation Modules

Living quarters, recreation rooms, and administrative offices on oil rigs and drillships.

Commercial Yachts & Superyachts

Exterior deck lounges, flybridge furniture, and interior guest spaces.

Workboats & Marine Research Ships

Wheelhouse seating, mess facilities, and utility spaces.

 

 

Manufacturing & Quality Control

Production Flow: Billet Extrusion to CNC Tube Bending to Precision TIG Welding to Chemical Pre-Treatment to Electrostatic Powder Coat to Curing Oven (200 degrees Celsius) to Load Testing & QC Audit


Vertical Integration: Complete oversight from raw aluminum profile extrusion to finished marine furniture assembly, ensuring strict quality control.


Dimensional Verification: Coordinate measuring checks on production lots to verify consistent alignment for modular shipboard installation.


Adhesion & Hardness Audits: Cross-hatch adhesion tests and pencil hardness checks performed regularly on active coating lines.


Marine Export Packaging: Protected with heavy-duty moisture barrier wrapping and reinforced crating designed to withstand rough sea freight and port handling.

Wooden Marine Seating Furniture

 

OEM & Customization
1

Custom Dimensioning

Tailored frame dimensions designed to fit unique ship compartment layouts and low-ceiling cabin spaces.

2

Deck-Securing Solutions

Integration of specialized mounting brackets, bolted floor flanges, or deck-tie-down provisions for heavy seas.

3

Surface Finishes

Wide selection of IMO-compliant color options, textured matte finishes, and wood-grain patterns for interior design harmony.

4

Identification Marking

Laser-etched project reference numbers, asset tags, or stainless steel nameplates for vessel fleet management.

 

FAQ

 

Q: What aluminum alloy grade is used for marine interiors?

A: We utilize Alloy 6063-T5 for extruded profiles and A380 for die-cast components. This combination delivers high structural rigidity, minimal weight, and excellent natural resistance to marine corrosion.

Q: How do the furniture frames resist saltwater corrosion in offshore environments?

A: Aluminum forms a protective oxide skin naturally. To maximize protection in harsh marine atmospheres, our frames undergo a multi-stage chemical conversion pre-treatment followed by an electrostatic thermosetting powder coating, passing over 1,000 hours of salt spray testing without degradation.

Q: What is the standard production lead time for ship outfitting projects?

A: Standard manufacturing lead time is 35 to 45 days following drawing approval and deposit confirmation. Accelerated production schedules can be coordinated for urgent dry-dock or vessel refit timelines.

Q: What is the Minimum Order Quantity (MOQ) for custom marine orders?

A: For standard catalog models, the MOQ is 100 units. For custom-dimensioned accommodation furniture or project-specific mounting configurations, the MOQ is evaluated based on the total outfitting scope or container load requirements.

Q: Do the materials comply with marine safety and fire regulations?

A: Yes. Our components are selected to meet strict marine requirements, including low-smoke generation and flame-retardant properties aligned with IMO FTP Code guidelines for passenger and offshore vessel safety.

Q: How is the furniture secured against rolling and pitching on vessels?

A: We provide various mounting options, including floor-bolted brackets, deck sockets, and flush-mounted fixing plates designed to keep furniture securely anchored during heavy sea states.

As one of the most professional aluminum furniture manufacturers and suppliers in China, we're featured by quality products and low price. Please rest assured to buy customized aluminum furniture made in China here from our factory. Contact us for pricelist and quotation.

Aluminium Profile Workbench, Aluminum Storage Shelves, Aluminum alloy marine storage cabinets

(0/10)

clearall